Adly Motor ATV-600, Руководство пользователя

Страница: 47 / 59

45
INSPECTION AND MAINTENANCE
Fuse
Fuse box is under the seat. Remove the seat and you can see the fuse box is on the right side.
Turn off ignition switch, and check fuses if they are intact. Replace the blown fuse with a new
one having the same specified amperage rating (30A or 15A or 10A).
Using a fuse which the ampere is larger than specification, a brass or iron wire to replace a
blown fuse is strictly prohibited to avoid damaging
the electrical system and the circuit.

Open the fuse box cover, and pull out the fuse. Check it for damage or broken.

Fuses must be filmy secured with wire connectors when replacing. Loose connections will
result in overhead and damage.

Use only parts having the specified specification to replace electrical components such as
light bulbs. Using parts not having the specified specification for replacement may cause
the fuse to blow and over-discharge the battery.

Avoid spraying water directly on or around fuse box when washing the ATV.

Take your ATV to your dealer for an inspection if a fuse is blown by unknown causes.