ADLINK Technology SP-AL Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 111

ADLINK Technology SP-AL Скачать руководство пользователя страница 107

Important Safety Instructions

91

SP-AL

Important Safety Instructions

For user safety, please read and follow all instructions, Warnings,
Cautions, and Notes marked in this manual and on the associated
device before handling/operating the device, to avoid injury or
damage.

S'il vous plaît prêter attention stricte à tous les avertissements et
mises en garde figurant sur l'appareil , pour éviter des blessures
ou des dommages.



Read these safety instructions carefully



Keep the User’s Manual for future reference



Read the Specifications section of this manual for detailed
information on the recommended operating environment



The device can be operated at an ambient temperature of
50ºC



When installing/mounting or uninstalling/removing device;
or when removal of a chassis cover is required for user ser-
vicing (See “Getting Started” on page 33.):



Turn off power and unplug any power cords/cables



Reinstall all chassis covers before restoring power



To avoid electrical shock and/or damage to device:



Keep device away from water or liquid sources



Keep device away from high heat or humidity



Keep device properly ventilated (do not block or cover
ventilation openings)



Always use recommended voltage and power source
settings



Always install and operate device near an easily acces-
sible electrical outlet



Secure the power cord (do not place any object on/over
the power cord)



Only install/attach and operate device on stable surfaces
and/or recommended mountings



If the device will not be used for long periods of time, turn off
and unplug from its power source

«
...
105
106
107
108
109
...
»

Содержание SP-AL
















































































































Отзывы:

Нет отзывов