manualshive.com logo in svg

ADLINK Technology PXIe-9834, Руководство пользователя

Поделиться
Скачать
ADLINK Technology PXIe-9834 Скачать руководство пользователя страница 33

Getting Started 

 21

PXIe-9834

2.3 Installing the Module

1. Turn off the PXIe system/chassis and ensure the power

cable from the power source is connected. 

2. Align the module’s edge with the module guide in the

PXIe chassis. 

3. Slide the module into the chassis until resistance is felt

from the PXIe connector. 

4. Push the ejector latch upwards and fully insert the mod-

ule into the chassis. 

5. Once the module is fully seated, a “click” can be heard

from the ejector latch. 

6. Tighten the screw on the faceplate.

7. Power up the PXIe system/chassis.

NOTE:

NOTE:

The power cable provides grounding to prevent hazardous 
ESD (electrostatic discharge).

WARNING:

Do not to perform "hot swapping", replacement, disconnecting 
or connecting of any components (including cards and cabling) 
on chassis while the system is powered up. By not observing 
this Warning, system damage and/or data loss, and physical 
injury (due to possible shock hazard) may result.

Содержание PXIe-9834


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды