ADLINK Technology PXI-3982 Скачать руководство пользователя

Страница: 73 / 77

Legacy Boot Mode Settings

PXI-3982

Appendix D Legacy Boot Mode Settings

UEFI boot mode is default for the PXI-3982 BIOS.

To boot in legacy boot mode, change related settings in the BIOS
menu:

1. Power on and press <DEL> or <ESC> to enter BIOS menu

2. Move to Boot

3. Move to Boot, CSM Configuration

4. Under “CSM Support” select “Enabled”

5. Under “Network” select “Legacy”

6. Under “Storage” select “Legacy”

7. Under “Video” select “Legacy”

8. Under “Other PCI devices” select “Legacy”

9. Press <F10> and <Enter> to save and exit BIOS menu.

The system will restart and apply settings for Legacy
boot mode.

To restore UEFI boot mode:

1. Power on and press <DEL> or <ESC> to enter BIOS menu

2. Press <F9> and <Enter> to load optimized defaults

3. Press <F10> and <Enter> to save and exit BIOS menu

The system restarts and default settings for UEFI boot mode are
applied.

Содержание PXI-3982














































































Результаты поиска

Содержание PXI-3982

Отзывы:

Похожие инструкции для PXI-3982

Бренды по названию

Популярные бренды

ADLINK Technology PXI-3982, Руководство пользователя

Результаты поиска

Содержание PXI-3982

Отзывы:

Похожие инструкции для PXI-3982

Бренды по названию

Популярные бренды