ADLINK Technology PXI -3950 Скачать руководство пользователя страница 65

Страница: 65 / 85

Driver

I nstallation

4.3

Ethernet Drivers

The PXI-3950 has one GbE port from an Intel ICH8M MAC/
Intel 82566 PHY and one GbE port from a Marvell 88E8053
Gigabit Ethernet controller to provide dual Gigabit Ethernet
connectivity.

4.3.1

Install the Intel GbE Driver

For Windows 2000 Users:

After booting the Windows system, there are two unidenti-
fied Ethernet controllers listed in the Device Manager.

Right-click on the Ethernet controller and select "Update
Driver …"

Follow the on-screen instructions to specify the location of
driver. The Ethernet driver is located in the directory:

x:\Driver Installation\PXI Platform\PXI

controller\PXI-3950\Ethernet\2000\, where
x: denotes the CD-ROM drive.

Repeat step 2 and 3 to install the Ethernet driver for another
Ethernet controller.

For Windows XP Users:

After booting the Windows system, there are two unidenti-
fied Ethernet controllers listed in the Device Manager.

Right-click on the Ethernet controller and select "Update
Driver …"

Follow the on-screen instructions to specify the location of
driver. The Ethernet driver is located in the directory:

x:\Driver Installation\PXI Platform\PXI

controller\PXI-3950\Ethernet\XP\, where x:
denotes the CD-ROM drive.

Repeat steps 2 and 3 to install the Ethernet driver for other
Ethernet controllers.

NOTE:

Drivers for both the Intel and Marvell GbE controllers need to
be installed prior to use.

Содержание PXI -3950






















































































Результаты поиска

Содержание PXI -3950

Отзывы:

ADLINK Technology PXI -3950, Руководство пользователя, Страница: 65 / 85

Результаты поиска

Содержание PXI -3950

Отзывы: