manualshive.com logo in svg

ADLINK Technology NuPRO-851, Руководство пользователя

Поделиться
Скачать
ADLINK Technology NuPRO-851 Скачать руководство пользователя страница 13

Introduction

 5

Universal Serial Bus (USB)

NuPRO-851 supports 2 USB2.0 serial ports backward compatible
to USB1.1. USB allows for the easy addition of peripherals such as
mouse, keyboard, speakers, and etc.  Transfer rates up to 480Mb/s
are supported. Full-speed connections (480Mb/s) require shielded
and tested cables. NuPRO-851 provides the standard 0.5A at 5V to
the peripherals. 

IDE and Floppy

The NuPRO-851 includes an IDE Controller (in the ICH6) and a
Floppy Disk Controller (in the IT8712F). The IDE Controller provides
support for internal or external IDE drives. Signals are available at
the IDE connectors CN6 and are routed to a 40-pin header. The FDD
Controller provides support for an external FDD drives. Signals are
available at the FDD connector CN8 and are routed to a 34-pin
header.

Keyboard/Mouse Controller

The NuPRO-851 includes an onboard PC/AT keyboard and mouse
controller. The keyboard/mouse signals are available through the
PS/2 circular DIN on the panel. Both the keyboard and mouse can
be connected at the same time using ADLINK’s Y cable.  An extra
pin header connector is available for connection of an external key-
board.  The NuPRO-851 keyboard/mouse controller resides in the
Winbond IT8712F Super I/O device

Software

The NuPRO-851 is compatible with all major PC operating systems.
ADLINK provides support for many popular operating systems,
including additional drivers for ADLINK peripherals. Software
device drivers for the NuPRO-851 may be found on the ADLINK CD.

Содержание NuPRO-851













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды