ADLINK Technology NuPRO-842 Series Скачать руководство пользователя | Manualshive

Страница: 51 / 62

background image

Device Driver Installation

39

NuPRO-842

1. Boot Windows 2000.

2. The driver is included in the ADLINK CD. Run Setup.exe

under the directory: X:\CHIP-
DRV\LAN\82540EM\pro2kxpm.

3. Click the Install now button on the Installation instruc-

tions screen to install the drivers.

4. Click Finish button to finish the installation.

Driver Installation on Windows 98/98SE/ME

Windows 98 will install the LAN drivers automatically. We rec-
ommend that users manually update the LAN drivers, which
come with the ADLINK CD to guarantee compatibility. After
installing Windows 98, please update to the new drivers by fol-
lowing these procedures.

1. Boot Windows 98.

2. The driver is included in the ADLINK CD. Run the

Setup.exe under the directory: X:\CHIP-
DRV\LAN\82540EM\pro98mem.

3. Click the Install now button on the Installation instruc-

tions screen to install the drivers.

4. Click Finish button to finish the installation.

Driver Installation on Windows NT

Windows NT may ask to install a LAN driver from its own library
of drivers. We recommend that users manually update the
LAN drivers, which come with the ADLINK CD to guarantee
compatibility. After installing Windows NT, please update to the
new driver by following these procedures.

1. Boot Windows NT.

2. The driver is included in the ADLINK CD. Run the

Setup.exe under the directory: X:\CHIP-
DRV\LAN\82540EM\pront4

3. Click the Install now button on the Installation instruc-

tions screen to install the drivers.

4. After installing, click the Restart now button to restart the

system.

«
...
49
50
51
52
53
...
»

Содержание NuPRO-842 Series































































Отзывы:

Нет отзывов

Похожие инструкции для NuPRO-842 Series

Бренд: IEI Technology Страницы: 155

Бренд: IEI Technology Страницы: 281

Бренд: IEI Technology Страницы: 151

Бренд: IEI Technology Страницы: 169

Бренд: IEI Technology Страницы: 125

Бренд: IEI Technology Страницы: 165

Бренд: IDT Страницы: 9

Бренд: IEI Technology Страницы: 12

Бренд: JETWAY Страницы: 41

Бренд: ASROCK Страницы: 39

Бренд: ST Страницы: 9

Advanced Socket 370

Бренд: BCM Advanced Research Страницы: 38

SKR E3 DIP V1.0

Бренд: BIGTREETECH Страницы: 10

B560M DS3H PLUS

Бренд: Gigabyte Страницы: 42

Бренд: Gigabyte Страницы: 84

7001G - VIA Mini ITX Motherboard

Бренд: VIA Technologies Страницы: 76

Бренд: Honda Страницы: 152

Бренд: Humandata Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды