ADLINK Technology nanoX-TCR, Справочное руководство

Страница: 29 / 51

Chapter 3 Hardware
nanoX-TCR Reference Manual 25
GPIO
The nanoX-TCR provides GPIO (General Purpose I/O) pins for custom use through the COM Express A-B
connector. Use the ADLINK Intelligent Device Interface (AIDI) Library to configure the GPIO interface.
AIDI driver information is available in the Utilities link of the nanoX-TCR product page at:
http://www.adlinktech.com . An AIDI demo program and the AIDI User’s Manual describing how to use the
GPIO pins also reside in the Utilities link of the nanoX-TCR product page.
For more information about GPIO pin operation, refer to the PCA9535BS GPIO Generator Datasheet. Refer
to “References” on page 1 for a hyper link to the datasheet.
Table 3-5 provides the pin signals for the COM Express A-B connector.
Table 3-5. COM Express A-B Connector Signal Descriptions
Pin # Row A Pin # Row B
A1 GND B1 GND
A2 GBE0_MDI3- B2 GBE0_ACT# (PU 10k 3.3V)
A3 GB B3 LPC_FRAME#
A4 GBE0_LINK100# (Ethernet Speed LED) B4 LPC_AD0
A5 GBE0_LINK1000# (Ethernet Speed LED) B5 LPC_AD1
A6 GBE0_MDI2- B6 LPC_AD2
A7 GB B7 LPC_AD3
A8 GBE0_LINK# (LAN Link LED) B8 NC (Not Connected)
A9 GBE0_MDI1- B9 NC (Not Connected)
A10 GB B10 LPC_CLK
A11 GND B11 GND
A12 GBE0_MDI0- B12 PWRBTN# (PU 10k 3.3V S5 Standby)
A13 GB B13 SMB_CK (PU 4.7k 3.3V S5 Standby)
A14 GBE0_CTREF B14 SMB_DAT (PU 4.7k 3.3V S5 Standby)
A15 SUS_S3# B15 SMB_ALERT#
A16 S B16 S (Occupied by optional SSD)
A17 SATA0_TX- B17 SATA1_TX- (Occupied by optional SSD)
A18 SUS_S4# B18 SUS_STAT# (Not Used)
A19 S B19 S (Occupied by optional SSD)
A20 SATA0_RX- B20 SATA1_RX- (Occupied by optional SSD)
A21 GND B21 GND
A22 RSVD B22 RSVD
A23 RSVD B23 RSVD
A24 SUS_S5# (Connected S4) B24 PWR_OK
A25 RSVD B25 RSVD
A26 RSVD B26 RSVD
A27 BATLOW# () B27 WDT (PU 10k 3.3V S5 Standby)
A28 ATA_ACT# (PU 10k 3.3V) B28 NC (Not Connected)
A29 AC/HDA_SYNC B29 AC_SDIN1 (Weak Pull Down)
A30 AC/HDA_RST# B30 AC_SDIN0 (Weak Pull Down)
A31 GND B31 GND