ADLINK Technology MI-960 Скачать руководство пользователя страница 79

Страница: 79 / 98

POST Codes

MI-960

Detect different devices (Parallel ports, serial ports, and

coprocessor in CPU, … etc.) successfully installed in the system

and update the BDA, EBDA…etc.

Updates CMOS memory size from memory found in memory test.

Allocates memory for Extended BIOS Data Area from base

memory. Programming the memory hole or any kind of

implementation that needs an adjustment in system RAM size if

needed.

Initializes NUM-LOCK status and programs the KBD typematic

rate.

Initialize Int-13 and prepare for IPL detection.

Initializes IPL devices controlled by BIOS and option ROMs.

Generate and write contents of ESCD in NVRam.

Log errors encountered during POST.

Display errors to the user and gets the user response for error.

Execute BIOS setup if needed / requested. Check boot password

if installed.

Late POST initialization of chipset registers.

Build ACPI tables (if ACPI is supported)

Program the peripheral parameters. Enable/Disable NMI as

selected

Initialization of system management interrupt by invoking all

handlers. Please note this checkpoint comes right after

checkpoint 20h

Clean-up work needed before booting to OS.

Takes care of runtime image preparation for different BIOS

modules. Fill the free area in F000h segment with 0FFh. Initializes

the Microsoft IRQ Routing Table. Prepares the runtime language

module. Disables the system configuration display if needed.

Initialize runtime language module. Display boot option popup

menu.

Displays the system configuration screen if enabled. Initialize the

CPU’s before boot, which includes the programming of the

MTRR’s.

Wait for user input at config display if needed.

Uninstall POST INT1Ch vector and INT09h vector.

Checkpoint

Description

Содержание MI-960



































































































Результаты поиска

Содержание MI-960

Отзывы:

Бренды по названию

Популярные бренды

ADLINK Technology MI-960, Руководство пользователя

Результаты поиска

Содержание MI-960

Отзывы:

Бренды по названию

Популярные бренды