ADLINK Technology MI-220, Руководство пользователя

Страница: 64 / 92

52 BIOS Setup
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit
indicates the beginning). The standard setting is 1 stop bit.
Communication with slow devices may require more than 1
stop bit. Set this value to 1 and 2.
Flow Control
Set this option to select Flow Control for console redirection.
The settings for this value are None, Hardware RTS/CTS.
Record Mode
With this mode enabled only text will be sent., allowing capture
of Terminal data. Set this value to Enabled or Disabled.
Resolution 100x31
Enable or disable extended terminal resolution. Set this value
to Enabled or Disabled.
Legacy OS Redirection Resolution
On a legacy OS, the number of Rows and Columns supported
by redirection. Set this value to 80x24 and 80x25.
Serial Port for Out-of-Band Management
These settings control the ACPI serial port redirection table
(SPCR) which is used by Windows servers to provide Windows
Emergency Management Services (EMS) and is independent from
console redirection output. OoB Management or EMS allows the
remote management of selected components of Windows servers,
even when a server is not connected to the network or the network
is not available
Console Redirection
Options: Enabled/Disabled.
Out-of-Band Mgmt Port
Options: COM0, COM4 (PCI Dev22, Func3), Disabled.