ADLINK Technology MI-110 Скачать руководство пользователя

Страница: 47 / 88

BIOS Setup

MI-110

4.2

Standard CMOS Features

The main menu includes the following setup categories. Recall
that some systems may not include all entries.

Date/Time

Use this option to change the system time and date. The date
must be entered in MM/DD/YY format. The time is entered in
HH:MM:SS format.

Note:

The time is in 24-hour format. For example, 5:30 A.M. appears as
05:30:00, and 5:30 P.M. as 17:30:00.

IDE Channel 0/1 Master/Slave

This selection brings up the configuration submenu of the desig-
nated device.

IDE HDD Auto-detection:

Press Enter to auto-detect the HDD on

the selected channel.

IDE Device Setup:

None/Auto/Manual. Selecting 'manual' allows

the user to set the remaining fields on the submenu.

Содержание MI-110

























































































Результаты поиска

Содержание MI-110

Отзывы:

Похожие инструкции для MI-110

Бренды по названию

Популярные бренды

ADLINK Technology MI-110, Руководство пользователя

Результаты поиска

Содержание MI-110

Отзывы:

Похожие инструкции для MI-110

Бренды по названию

Популярные бренды