manualshive.com logo in svg

ADLINK Technology MCM-216, Руководство пользователя, Страница: 61 / 69

Поделиться
Скачать
ADLINK Technology MCM-216 Скачать руководство пользователя страница 61

DAQ Missions

 53

MCM-216/218

4

DAQ Missions

The MCM-216/218 supports various modes of operation that
users can choose from to quickly integrate into their systems.

4.1

Usage Behaviors

In contrast to data filtering, some applications, such as lab testing,
require continuous raw data for analysis. However, continuous
transmission of large amounts of raw data places a heavy burden
on the backend server and takes up more network bandwidth.
Evaluate your bandwidth and application requirements carefully in
order to adopt the most suitable programming method for your
needs.

There are three major usage behaviors: Periodic Polling, Continu-
ous Data, and Passive Data. Choosing between them depends on
how frequently data must be retrieved. Figure 4-1 on page 54 can
serve as a guide for selecting the appropriate usage behavior for
system integration based on polling data frequency.

For the periodic polling mode, MCM-216/218 provides a REST
API and sample code in C#, Python, and JavaScript. Alternatively,
for continuous data mode, MCM-216/218 provides a Streaming
SDK and associated C/C++ sample code.

Содержание MCM-216






































































Отзывы:

Нет отзывов