
EVA SDK User's Manual
Image and Video Capture Plugins
11
fps
“fps” gdouble
(Frames per second) Sets the framerate of the video coming from the camera. Setting the value too high might
cause the plugin to crash. Note that if the pipeline causes the computer to hang, or stall, then the resulting video
will not be in the resolution that was set. Setting this parameter will set acquisitionframerateenable to true. The
value of this parameter will be saved to the camera, but it will have no effect unless either this or the
acquisitionframerateenable parameters are set. Reconnect the camera or use the reset parameter to reset.
Range: 0.0 to 1024.0
Flags: Read, Write
Default value: 0.0
lightsource
“lightsource” gchararray
(off, 2800k, 5000k, 6500k) Changes the color balance settings to those defined by the presets. For best results,
select a color balance setting closest to the environment's lighting. Running the plugin without specifying this
parameter will reset the value stored on the camera to "5000k".
Flags: Read, Write
Default value: "5000k"
autoexposure
“autoexposure” gchararray
(off, once, continuous) Controls whether the camera will try to adjust the exposure settings. Setting this
parameter to anything but "off" will override the exposure parameter. Running the plugin without specifying this
parameter will reset the value stored on the camera to "off".
Flags: Read, Write
Default value: "off"
exposure
“exposure” gdouble
(Microseconds) Exposure time for the camera in microseconds, but only has an effect if autoexposure is set to
off (default). Higher numbers will cause a lower frame rate. Note that the camera will remember this setting, and
will use values from the previous runs if you relaunch without specifying this parameter. Reconnect the camera
or use the reset parameter to reset. Range: 0.0 to 1000000.0
Flags: Read, Write
Default value: 0.0
autowhitebalance
“autowhitebalance” gchararray
(off, once, continuous) Controls whether the camera will try to adjust the white balance settings. Setting this
parameter to anything but "off" will override the exposure parameter. Running the plugin without specifying this
parameter will reset the value stored on the camera to "off".
Flags: Read, Write
Default value: "off"
Содержание EVA SDK
