ETX-BT
9
2.4 Ethernet
X
Type
: Intel® i211 (MAC/PHY) Ethernet controller
X
Interface
: 10/100 Mbps on ETX signal connector
(build option for 1000/100/10 Mbps via FPC connector on module, only one output
can be active at a time)
2.5 Multi I/O and Storage
X
USB
: 4 ports USB 2.0/1.1
X
PATA
: up to two PATA IDE with Master only support by SATA-to-PATA controller
o
Supports PIO / MDMA / UDMA modes
(ETX module maximum sustainable speed mode is UDMA2)
o
Following modes are examples of what can be supported.
Note: Except for defaults, these are build options that require special part
numbers.
Port
Function
1
PATA
(default)
PATA SATA SATA
2
SATA
(default)
PATA PATA SATA
SSD
(When a SATA port is not supported the designated interface connector is
removed.)
X
SATA
: 2 SATA 3Gb/s ports (shared with PATA, see above)
X
SATA SSD
: optional SATA SSD 2-64 GB onboard (occupies second external
SATA port)
2.6 Super I/O
X
Chipset
: Nuvoton W83627DHG-PT
X
Serial
: 2 high speed RS-232C ports (COM1/COM2)
X
IrDA
: supports IrDA 1.0 SIR protocol or Sharp ASK-IR protocol
X
Parallel
: SPP, and EPP mode support (no DMA support)