ADLINK Technology EGX-MXM-RTX3000 Скачать руководство пользователя страница 32

Страница: 32 / 33

Important Safety Instructions

Leading

EDGE COMPUTING

Never attempt to repair the device, which should only be
serviced by qualified technical personnel using suitable
tools

The device must be serviced by authorized technicians
when:

The power cord or plug is damaged

Liquid has entered the device interior

The device has been exposed to high humidity and/or
moisture

The device is not functioning or does not function
according to the User’s Manual

The device has been dropped and/or damaged and/or
shows obvious signs of breakage

Disconnect the power supply cord before loosening the
thumbscrews and always fasten the thumbscrews with a
screwdriver before starting the system up

It is recommended that the device be installed only in a
server room or computer room where access is:

Restricted to qualified service personnel or users familiar
with restrictions applied to the location, reasons therefor,
and any precautions required

Only afforded by the use of a tool or lock and key, or
other means of security, and controlled by the authority
responsible for the location.

BURN HAZARD

Touching this surface could result in bodily injury.
To reduce risk, allow the surface to cool before
touching.

RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait
entraîner des blessures.
Pour éviter tout danger, laissez la surface refroidir
avant de la toucher.

Содержание EGX-MXM-RTX3000


































Результаты поиска

Содержание EGX-MXM-RTX3000

Отзывы:

Похожие инструкции для EGX-MXM-RTX3000

Бренды по названию

Популярные бренды

ADLINK Technology EGX-MXM-RTX3000, Руководство пользователя

Результаты поиска

Содержание EGX-MXM-RTX3000

Отзывы:

Похожие инструкции для EGX-MXM-RTX3000

Бренды по названию

Популярные бренды