manualshive.com logo in svg

ADLINK Technology DLAP-211-JNX Series, Руководство пользователя, Страница: 43 / 47

Поделиться
Скачать
ADLINK Technology DLAP-211-JNX Series Скачать руководство пользователя страница 43

Important Safety Instructions

 33

DLAP-211-JNX / DLAP-211-JT2 / DLAP-211-Nano Series

Important Safety Instructions

For user safety, please read and follow all instructions, Warnings,
Cautions, and Notes marked in this manual and on the associated
device before handling/operating the device, to avoid injury or
damage.

Read these safety instructions carefully.

Keep the User’s Manual for future reference.

Read the Specifications section of this manual for detailed 
information on the recommended operating environment.

The device can be operated at an ambient temperature of 
55ºC with DC input; 40ºC with adapter input.

It is recommended that the device be installed in Informa-
tion Technology Rooms that are in accordance with Article 
645 of the National Electrical Code and NFPA 75.

When installing/mounting or uninstalling/removing the device:

Turn off power and unplug any power cords/cables.

Reinstall all chassis covers before restoring power.

To avoid electrical shock and/or damage to device:

Keep device away from water or liquid sources.

Keep device away from high heat or humidity.

Keep device properly ventilated (do not block or cover 
ventilation openings).

Always use recommended voltage and power source 
settings.

Always install and operate device near an easily acces-
sible electrical outlet.

Secure the power cord (do not place any object on/over 
the power cord).

Only install/attach and operate device on stable surfaces 
and/or recommended mountings.

The Smart Touch Computer is powered by adapter or 
DC source. Ensure that the adapter or DC source is 
properly grounded.

If the device will not be used for long periods of time, turn off 
and unplug it from its power source

Содержание DLAP-211-JNX Series
















































Отзывы:

Нет отзывов