manualshive.com logo in svg

ADLINK Technology DLAP-201 Series, Руководство пользователя

Поделиться
Скачать
ADLINK Technology DLAP-201 Series Скачать руководство пользователя страница 11

Introduction

 1

DLAP-201 Series

1

Introduction

ADLINK’s DLAP-201 Series Edge Inference System leverages the
power of NVIDIA® Jetson™ TX2/TX2i modules to deliver artificial
intelligence (AI) at the edge. The DLAP-201-JT2 Edge AI Platform
with integrated NVIDIA Jetson TX2 accelerates deep learning
workloads for object detection, recognition, and classification. With
the rapidly increased adoption of AI across industries, the DLAP-
201-JT2 can be useful for a wide variety of smart city and smart
manufacturing applications, including real-time traffic flow analysis
at an intersection for traffic management optimization, improve-
ment of smart bus services, strengthening of security surveillance,
and many others.

The DLAP-201 Series provides a wide variety of industrial I/O and
visual inferencing capabilities in a compact system. With a lock-
able HDMI display, two GbE ports, three USB 3.0 ports (plus a
USB 2.0 OTG port for software updates), one COM port, one iso-
lated CAN bus, one audio jack for mic-in or line-out support, 32GB
of eMMC storage plus one mSATA and one SD slot for additional
storage options, Wi-Fi and Bluetooth support, and an mPCIe slot
and USIM socket to support other wireless communications such
as LoRa and 3G/4G LTE, the DLAP-201-JT2 enables AI at the
edge with exceptional performance and convenience while keep-
ing power consumption to a minimum.

1.1

Features

Deep learning acceleration with NVIDIA® Jetson™ TX2/TX2i

NVIDIA® Pascal™ GPU with 256 CUDA cores

8GB 128-bit LPDDR4

32GB eMMC plus SDIO and mSATA storage interfaces

Compact fanless system: 148(W) x 104.8(D) x 52.1(H) mm

Wide temperature range: -20°C to 70°C

Содержание DLAP-201 Series








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды