ADLINK Technology cPCI-6510 Series Скачать руководство пользователя страница 32

Страница: 32 / 112

Functional Description

cPCI-6510

Functional Description

The following sections describe the cPCI-6510 Series features

and functions.

3.1

Processor

Intel® Core™ i7 Processor

The Intel® Core™ i7-620LE/UE and i7-610E are 64-bit, multi-core

mobile processors built on a 32 nanometer process technology.

The processors are designed for a two-chip platform consisting of

a processor and the Platform Controller Hub (PCH) and enables

higher performance, lower cost, easier validation, and improved

x-y footprint. The Intel® Core™ i7-620LE/UE and i7-610E proces-

sors are offered in a BGA1288 package and include an integrated

graphics and memory controller die on the same package as the

processor core die.
The following table lists the processors supported by the

cPCI-6510 Series and their specifications.

Notes:

1. The highest expected sustainable power while running known

power intensive applications. TDP is not the maximum power

that the processor can dissipate.

2. Maximum junction temperature (T

j,Max

). The maximum sup-

ported operating temperature.

Features

SV Core i7-610E LV Core i7-620LE ULV Core i7-620UE

Clock

2.53GHz

2.0GHz

1.06GHz

Max. Turbo Freq.

3.2GHz

2.8GHz

2.13GHz

L2 cache

4MB

Max. Power (TDP

)

35W

25W

18W

j,Max

105°C

Process

32nm

# of cores/threads

2/4

Содержание cPCI-6510 Series

















































































































Результаты поиска

Содержание cPCI-6510 Series

Отзывы:

ADLINK Technology cPCI-6510 Series, Руководство пользователя, Страница: 32 / 112

Результаты поиска

Содержание cPCI-6510 Series

Отзывы: