ADLINK Technology cPCI-3610 Series Скачать руководство пользователя страница 105

Страница: 105 / 108

Important Safety Instructions

cPCI-3610

Important Safety Instructions

For user safety, please read and follow all

instructions

WARNINGS

CAUTIONS,

and

NOTES

marked in this manual

and on the associated equipment before handling/operating the
equipment.

Read these safety instructions carefully.

Keep this user’s manual for future reference.

Read the specifications section of this manual for detailed
information on the operating environment of this equipment.

When installing/mounting or uninstalling/removing
equipment:

Turn off power and unplug any power cords/cables.

To avoid electrical shock and/or damage to equipment:

Keep equipment away from water or liquid sources;

Keep equipment away from high heat or high humidity;

Keep equipment properly ventilated (do not block or
cover ventilation openings);

Make sure to use recommended voltage and power
source settings;

Always install and operate equipment near an easily
accessible electrical socket-outlet;

Secure the power cord (do not place any object on/over
the power cord);

Only install/attach and operate equipment on stable
surfaces and/or recommended mountings; and,

If the equipment will not be used for long periods of time,
turn off and unplug the equipment from its power source.

Содержание cPCI-3610 Series













































































































Результаты поиска

Содержание cPCI-3610 Series

Отзывы:

Похожие инструкции для cPCI-3610 Series

Бренды по названию

Популярные бренды

ADLINK Technology cPCI-3610 Series, Руководство пользователя

Результаты поиска

Содержание cPCI-3610 Series

Отзывы:

Похожие инструкции для cPCI-3610 Series

Бренды по названию

Популярные бренды