ADLINK Technology CoreModule 920, Справочное руководство

Страница: 33 / 64

Chapter 3 Hardware
CoreModule 920 Reference Manual 27
USB Interface
The CoreModule 920 contains two root USB hubs and six functional USB ports. Four of the six USB ports
are routed through two 10-pin headers (H15 and J25), and the other two ports are routed through the
PCIe/104 interface connector. The PCH provides the USB function including the following features:
•
Supports USB v.2.0 EHCI and USB v.1.1 UHCI
•
Provides over-current detection status
•
Provides a fuse on board for over-current protection
Table 3-6 describes the pin signals of the USB0 and USB1 header which consists of 10 pins, in two rows,
with odd/even (1, 2) pin sequence, and 0.100" (2.54mm) pitch.
Note: The shaded table cells denote power or ground.
Table 3-7 describes the pin signals of the USB2 and USB3 header, which consists of 10 pins in two rows,
with odd/even (1, 2) pin sequence, and 0.079" (2mm) pitch.
Note: The shaded table cells denote power or ground.
Table 3-6. USB0 and USB1 Interface Pin Signals (H15)
Pin # Signal Description
1 USB-PWR_0 USB0 Power – VCC (+5V +/-5%) power goes to the port through an on-
board fuse. Port is disabled if this input is low.
2 USB-PWR_1 USB1 Power – VCC (+5V +/-5%) power goes to the port through an on-
board fuse. Port is disabled if this input is low.
3 CONN_USB0_N USB0 Port Data Negative
4 CONN_USB1_N USB1 Port Data Negative
5 CONN_USB0_P USB0 Port Data Positive
6 CONN_USB1_P USB1 Port Data Positive
7 USB_GND0 USB0 Ground
8 USB_GND1 USB1 Ground
9 USB_GND0 USB0 Ground
10 USB_GND1 USB1 Ground
Table 3-7. USB2 and USB3 Interface Pin Signals (J25)
Pin # Signal Description
1 USB-PWR_2 USB2 Power – VCC (+5V +/-5%) power goes to the port through an on-
board fuse. Port is disabled if this input is low.
2 USB-PWR_3 USB3 Power – VCC (+5V +/-5%) power goes to the port through an on-
board fuse. Port is disabled if this input is low.
3 CONN_USB2_N USB2 Port Data Negative
4 CONN_USB3_N USB3 Port Data Negative
5 CONN_USB2_P USB2 Port Data Positive
6 CONN_USB3_P USB3 Port Data Positive
7 USB_GND2 USB2 Ground
8 USB_GND3 USB3 Ground
9 USB_GND2 USB2 Ground
10 USB_GND3 USB3 Ground