manualshive.com logo in svg

ADLINK Technology CoreModule 430, Справочное руководство, Страница: 10 / 56

Поделиться
Скачать
ADLINK Technology CoreModule 430 Скачать руководство пользователя страница 10

Chapter 2

Product Overview

4

Reference Manual

CoreModule 430

Product Description

The CoreModule 430 SBC is an exceptionally high integration, x86-based PC compatible system in the 

PC/104 form factor. This rugged and high quality single board system contains all the component 
subsystems of a PC/AT motherboard plus the equivalent of several PC/AT expansion boards. 

In addition, the CoreModule 430 SBC includes a comprehensive set of system extensions and enhancements 

that are specifically designed for embedded systems. These enhancements ensure fail-safe embedded system 
operation, such as a watchdog timer. The CoreModule 430 is designed to meet the size, power consumption, 

temperature range, quality, and reliability demands of embedded applications. The CoreModule 430 requires 

a 5V power source. 

The CoreModule 430 SBC is particularly well suited to either embedded or portable applications. Its 

flexibility makes system design quick and easy. It can be stacked with ADLINK MiniModules or other 

PC/104-compliant expansion boards, or it can be used as the computing engine in a fully customized 
application.

Module Features 

•

CPU

Provides x86 based DMP Vortex SX (300 MHz) or DX (800 MHz) microprocessor  

Provides integrated Northbridge and Southbridge

Fully supports PC compatible architecture 

Provides 8 kB Unified Instruction and Data Cache

Provides Parallel Processing Integrated Floating Point Unit (only in DX version)

Provides Low Power and System Management Modes

•

Memory   

Provides up to 256 MB standard DDR2 system RAM (soldered on the board)

Provides up to 32 MB standard DDR2 video RAM (soldered on the board)

Supports Memory Bus Speeds of 166 MHz on the SX CPU and 333 MHz on the DX CPU

•

PC/104 Bus Interface  

Provides standard PC/104 connector

Supports clock speeds up to 8 MHz ISA

•

IDE Interface   

Provides one IDE channel

Supports two enhanced IDE devices 

Provides Fast ATA-capable interface for high-speed PIO modes 
(PIO modes 0 to 4)

Supports ATAPI and DVD peripherals

Supports IDE native and ATA compatibility modes

•

Compact Flash Socket 

Provides Compact Flash socket (Type I or II)

Supports IDE Compact Flash cards

Attached to Primary IDE bus

Содержание CoreModule 430

























































Отзывы:

Нет отзывов