ADLINK Technology COM Express Type 7 Starter Kit Plus, Быстрый старт

Страница: 25 / 26

Type 7 Starter Kit Plus
Safety Instructions
21
Safety Instructions
Read and follow all instructions marked on the product and in the documentation before you operate your system.
Retain all safety and operating instructions for future use.
•
Please read these safety instructions carefully.
•
Please keep this User‘s Manual for later reference.
•
The equipment should be operated only from the type of power source indicated on the rating label. Make
sure the voltage of the power source when connect the equipment to the power outlet.
•
If your equipment has a voltage selector switch, make sure that the switch is in the proper position for your
area. The voltage selector switch is set at the factory to the correct voltage.
•
For pluggable equipment, that the socket-outlet shall be installed near the equipment and shall be easily
accessible.
•
Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
•
If the equipment is not use for long time, disconnect the equipment from mains to avoid being damaged by
transient overvoltage.
•
All cautions and warnings on the equipment should be noted.
•
Please keep this equipment from humidity.
•
Do not use this equipment near water or a heat source.
•
Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
•
Never pour any liquid into opening; this could cause fire or electrical shock.
•
Openings in the case are provided for ventilation. Do not block or cover these openings. Make sure you
provide adequate space around the system for ventilation when you set up your work area. Never insert
objects of any kind into the ventilation openings.
•
To avoid electrical shock, always unplug all power cables and modem cables from the wall outlets before
removing covers.
•
Lithium Battery provided (real time clock battery)
CAUTION – Risk of explosion if battery is replaced with one of an incorrect type. Dispose of used
batteries according to the instructions
•
If one of the following situations arises, get the equipment checked by a service personnel:
ƒ
The power cord or plug is damaged.
ƒ
Liquid has penetrated into the equipment.
ƒ
The equipment has been exposed to moisture.
ƒ
The equipment has not work well or you can not get it work according to user‘s manual.
ƒ
The equipment has dropped and damaged.
ƒ
If the equipment has obvious sign of breakage.