5
aTCA-81514PA
1 Safety
The intended audience of this User’s Manual is system integrators and
hardware/software engineers.
1.1 Safety Symbols used in this document
1.2 General Safety Precautions
•
Service personnel must know the necessary electrical safety, wiring and
connection practices for installing this equipment.
•
Install this equipment only in compliance with local and national electrical
codes.
•
For additional information about this equipment, see the
PICMG 3.0 Specification (
www.picmg.org
).
Hazardous voltage!
This is the electrical hazard symbol. It indicates that there are dangerous
voltages inside the Shelf.
Caution!
This is the user caution symbol. It indicates a condition where damage of the
equipment or injury of the service personnel could occur. To reduce the risk of
damage or injury, follow all steps or procedures as instructed.
Risk of electrostatic discharge!
The Shelf contains static sensitive devices. To prevent static damage you must
wear an ESD wrist strap.
Warning!
Voltages over 42 V
AC
or 60 V
DC
can be present in this equipment. As defined in the
PICMG 3.0 Specification, this equipment is intended to be accessed, installed and
maintained by qualified and trained service personnel only.
