ADLINK Technology ACLD-9182, Руководство пользователя

Страница: 11 / 13

Installation
•
7
** Pin-20 (+12V) depends on the output form digital input connector, such
as ACL-8111, ACL-8112 are +12V , and ACL-7120 is strobe signal.
2.5 Input Mode Setting
There are 16 jumpers (JP0...JP15) associated with each digital
input channel for configuring the channel as AC or DC input. The
digital input channels and their corresponding jumpers is shown
in the following Table 2.2.
D/I Channel Jumpers D/I Channel Jumpers
0 JP0 8 JP8
1 JP1 9 JP9
2 JP2 10 JP10
3 JP3 11 JP11
4 JP4 12 JP12
5 JP5 13 JP13
6 JP6 14 JP14
7 JP7 15 JP15
Table 2.2
Each channel comes equipped with a jumpers for either AC or
DC selection.
Input Signal
Selection
AC Input DC Input
(Default)
Jumper
JP0 ~ JP15
Figure 2.3