ADLINK Technology ACL-7130, Руководство пользователя, Страница: 17 / 41

Installation
•
11
be set as IRQ9~IRQ15 by jumper JP2. It is illustrated as figure
2.4.
Both of lower and higher IRQ can generate interrupt
simultaneously.
The external digital signals can trigger the interrupt through lower
interrupt setting. There are four different digital I/O signals can be
used as interrupt trigger sources, also the trigger mode is either
fall-edge or rising-edge trigger.
Note : Both lower and higher IRQ can be set simultaneously. And, two
different IRQ can be generated by using ACL-7130.
Be aware that there is no other add-on card shares the same
interrupt level at the same system.
IRQ1
3 4 5 6 7
JP1
NC
Figure 2.3 JP1 Setting for lower IRQ
IRQ2
9 10 11 12 15
JP2
NC
Figure 2.4 JP2 Setting for higher IRQ