Adler Europe AD 02UK, Инструкция по эксплуатации

Страница: 4 / 4

4
stores, offices and other work environments, utility rooms, by customers in hotels, motels
and other residential environments of this type, in bedrooms and dining rooms.
20. Always use caution when boiling water in the kettle. Do not touch the housing of kettle
or lid. Do not open the lid during boiling in kettle or immediately after boiling, because
steam coming out of lid can cause burns.
21. Move the kettle only by holding it by handle..
22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.
23. Never switch on kettle without water.
24. Never use kettle without filter or with open cover (automatic shutdown will not work).
25. Descale your kettle regularly. Using kettle with heating element covered by scale may
cause damage.
26. Do not use aggressive detergents to wash the kettle housing - they can damage the
kettle or remove the markings.
27. The device is not designed to work with external schedulers or separate remote control
system.
28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
29. Children aged 3 to 8 years old can enable and disable the device only when it is in its
normal position of use, they are supervised or instructed on the safe use and understand
the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean
or maintain.
DESCRIPTION: CORDLESS ELECTRIC KETTLE Ad02
1 - Housing 2 - ON / OFF switch 3 - Indicator lamp 4 - Base
5 - Lid 6 - Handle 7 - Lid unlock
USING THE ELECTRIC KETTLE
BEFORE FIRST USE: Fill up the kettle with water, boil and pour out. Repeat four times with fresh water. To
remove possible scent oo the factory. For the fifth time, boiled water is ready for consumption.
1. Fill the kettle with water. Make sure that heating plate is fully immersed in water.
2. Place the appliance on the flat, even and heat resistant surface.
3. Plug in the kettle to the 220-240~50/60Hz mains, press ON/OFF switch. Indicator lamp will light up.
4. After boiling water the kettle will automatically switch off.
5. Before taking the kettle out of the base make sure it is switched off.
6. The kettle can manually be switched off in any time by ON/OFF switch.
7. Keep lid closed during boiling process. Otherwise, the kettle won't automatically switch off.
8. After boiling, the thermostat is ready for next operation after 2 minutes. After this time kettle can be
switched on again.
9. Regularly remove limestone sediment inside the kettle. Sediment may cause overheating of the kettle,
shorten life cycle and cancel guarantee. Apply citric acid mixed with water and leave for 8 hours to cancel
limestone sediment. Rinse the kettle several times before using it again.
10. Switching empty kettle, or with insufficient level of water, will cause automate switching off the kettle.
Wait till cool down the kettle, pour enough water and after few minutes switch the kettle on.
11. The kettle is an electrical device and it is not designed to hold water or other liquids. After boiling, the
water must be immediately pour into another bowl. The water in the kettle after boiling can not stay longer
than 10 minutes. Before each use, fill the kettle with fresh water above the minimum and below the
maximum level.
CLEANING OF MAINTENANCE
Regularly descale the kettle. Descaling doesn’t belong to guarantee service. Lack of regular descaling
causes damage of the elements of the appliance and cancels warranty of the product. Use descaling mixture
to descale the kettle.
TECHNICAL DATA: Capacity max: 0,6 L Voltage: 220-240V ~50/60Hz Power: 760W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.