Chapter:
Introduction
Important Notes
page 6
Advanced Digital Logic
ADLS15PC
1 Introduction
1.1 Important Notes
Please read this manual carefully before you start with the installation of this hardware device. To avoid
Electrostatic Discharge (ESD) or transient voltage damage to the board, adhere to the following rules at
all times:
o
You must discharge your body from electricity before touching this board.
o
Tools you use must be discharged from electricity as well.
o
Please make sure that neither the board you want to install, nor the unit you want to install this board
on, is energized before installation is completed.
o
Please do not touch any devices or components on the board.
C
AUTION
As soon as the board is connected to a working power supply, touching the board may result in electrical
shock, even if the board has not been switched on yet. Please also note that the mounting holes for heat
sinks are connected to ground, so when using an externally AC powered device, a substantial ground
plane differential can occur if the external device's AC power supply or cable does not include an earth
ground. This could also result in electrical shock when touching the device and the heat sink
simultaneously.
1.2 Technical Support
Technical support for this product can be obtained in the following ways:
o
By contacting our support staff at +1 858-490-0597 or +49 (0) 271 250 810 0
o
By contacting our staff via e-mail at [email protected] or [email protected]
o
Via our website at www.adl-usa.com/support or www.adl-europe.com/support
1.3 Warranty
This product is warranted to be free of defects in workmanship and material. ADL’s sole obligation under
this warranty is to provide replacement parts or repair services at no charge, except shipping cost. Such
defects which appear within 12 months of original shipment of ADL will be covered, provided a written
claim for service under warranty is received by ADL no less then 30 days prior to the end of the warranty
period of within 30 days of discovery of the defect – whichever comes first. Warranty coverage is
contingent upon proper handling and operation of the product. Improper use such as unauthorized
modifications or repair, operation outside of specified ratings, or physical damage may void any service
claims under warranty.
1.4 Return Authorization
All equipment returned to ADL for evaluation, repair, credit return, modification, or any other reason must
be accompanied by an RMA number. In order to obtain an RMA authorization number we will need a
completed RMA form submitted to [email protected] or faxed to +1 858-490-0599 for the USA office.
For a return to the European office in Germany, please submit the form to [email protected] or fax to
+49 (0) 271 250 810 20. The form can be obtained at our website: www.adl-usa.com or www.adl-
europe.com under the Support section. Following a review of the information provided we will issue a
return authorization number.
Содержание S15PC
Страница 2: ......
