Adkins Hobby Jack, Руководство оператора

Страница: 5 / 20

Your Hobby Jack heat press must be used and rested on a firm, flat and stable surface.
Your Hobby Jack heat press should not be used if it has been dropped, if there are visible
signs of damage.
Never bend the power lead when using or putting you Hobby Jack heat press away as in
time this could damage the device.
For non-rewireable plugs the fuse cover MUST be refitted when replacing fuse. If the
fuse cover is lost then the plug must not be used until a replacement can be obtained.
Before use remove all packaging and any loose labels from you Hobby Jack heat press.
Leave warning stickers in place.
Your Hobby Jack heat press should be situated within easy reach, during operation, with
sufficient space around it so that no trapping points are created.
When lowering the heat plate on your Hobby Jack heat press it is recommended that you
use both hands.
Your Hobby Jack heat press should be operated in adequate lighting condition only.
This appliance is designed for use in the following conditions; Temperature 5 to 40°C (41
to 104°F) ; Humidity 20 to 80%.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Operators Manual
Important safety instructions
Important safety instructions
(continued)
2