ADJ VIZI WASH Z37 Скачать руководство пользователя страница 25

Страница: 25 / 43

S Y S T E M M E N U

Internal Programs (continued)

Program 3

Select Program 2, then press the ENTER button to confirm. Use the UP/DOWN button to select

Speed or Fade, then press the ENTER button to store. Press the MENU button to move back to the

last menu, or let the unit idle one minute to exit menu mode.
Program 4

Select Program 4, then press the ENTER button to confirm. Use the UP/DOWN button to select

Speed or Fade, then press the ENTER button to store. Press the MENU button to move back to the

last menu, or let the unit idle one minute to exit menu mode.

Target Mode
Select Target Mode, then press the ENTER button to confirm. Use the UP/DOWN button to select

Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.

Mode 0

Select Mode 0, then press the ENTER button to confirm. With this selection, the Pan movement

range is 540°, and the Tilt movement range is 270° (see Target Modes on page 27). Press the

MENU button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Mode 1

Select Mode 0, then press the ENTER button to confirm. With this selection, the Pan movement

range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU

button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Mode 2

Select Mode 2, then press the ENTER button to confirm. With this selection, the Pan movement

range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU

button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Mode 3

Select Mode 3, then press the ENTER button to confirm. With this selection, the Pan movement

range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU

button to move back to the last menu, or let the unil idle one minute to exit menu mode.
Mode 4

Select Mode 4, then press the ENTER button to confirm. With this selection, the Pan movement

range is 90°, and the Tilt movement range is 135° (see Target Modes on page 27). Press the MENU

button to move back to the last menu, or let the unit idle one minute to exit menu mode.

Information
Select Information, then press the ENTER button to confirm. Use the UP/DOWN button to select

Fixture Life Time , Total LED Time, Fixture Temps, Fan Info, DMX Values, Error Logs, Max Temp

LED ON, High Temp LED OF, or Software Version.

Fixture Life Time

Select Fixture Life Time, then press the ENTER button to confirm. Use the UP/DOWN button to select

Power On Time, P-On Time-R, or P-On Time Reset, then press the ENTER button to store. Press the

MENU button to move back to the last menu, or let the unit idle one minute to exit menu mode.
Total LED Time

Select Total LED Time, then press the ENTER button to confirm. Use the UP/DOWN button to select

LED on Time, LED On Time-R, or LED On Time Reset, then press the ENTER button to store. Press

the MENU button to move back to the last menu, or let the unit idle on minute to exit menu mode.

Содержание VIZI WASH Z37












































Результаты поиска

Содержание VIZI WASH Z37

Отзывы:

Бренды по названию

Популярные бренды

ADJ VIZI WASH Z37, Руководство пользователя

Результаты поиска

Содержание VIZI WASH Z37

Отзывы:

Бренды по названию

Популярные бренды