ADJ VF SNOW FLURRY HO, Руководство пользователя, Страница: 9 / 14

9
1. Open the shipping carton and carefully remove the unit from the shipping carton. Make sure to
remove all the packing material, and pay particular attention to the area around the nozzle/sock.
2. Set the snow machine on a flat dry surface. Remove the included bracket from the package and
attach it to the side of the snow machine using the supplied hardware. Note: The bracket is an
optional accessory and is required when the device is installed in a hanging or suspended
setting.
3. Remove the fluid reservoir and fill it with ADJ® brand snow juice only, then replace the reservoir.
4. Place the feeder tube with the filter deep inside the reservoir and tighten the cap.
5. Using the switch on the rear of the unit, set the air volume output to either the minimum setting
(large snow flakes) or the maximum setting (small snow flakes).
6. Firmly attach the remote control unit to the rear remote control socket on the unit. Turn the rotary
knob to adjust the snow output level. Turning the knob clockwise reduces the snow output, while
turning it counter-clockwise increases the snow output.
7. Plug the unit in to a matching power supply. Switch on the main power located on the rear panel
of the unit.
Note: The liquid reservoir will glow green when the device is connected to power.
SET UP