©
ADJ Products, LLC - www.adj.com - Ultra Go Par7X User Manual Page 13
Ultra Go Par7X Operating Instructions
desired color you can activate strobing by pressing the SET UP
button to enter the Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
LED Display On/Off:
To set the LED display to turn off after 20 seconds, press the MODE
button until “don” is displayed, press the UP button to display “doff”.
Now the display will disappear after 20s. Press any button to turn the
display on again. Be advised though that the display will turn off auto-
matically after 20 seconds.
To set the display press the MODE button until “dXX” is displayed.
Use the UP or DOWN buttons to select either:
“don” = LED display on at all times.
“doFF” = LED display shuts off after 20 seconds.
ADJ RFC:
This function is used to activate and deactivate the ADJ RFC (Remote
Control). When this function is activated you can control the fixture
using the ADJ RFC. Please see the next page for ADJ RFC controls
and functions.
1. Plug the fixture in and press the MODE button until “dXX” is dis-
played. “XX” represents either “on” or “oFF”.
2. Press the SET UP button until “rFXX” is displayed. “XX” repre-
sents either “on” or “oF”.
3. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate it (Off).
LED Display Inversion:
Follow these instructions to flip the display 180° so that the display
can be read upside down.
1. Plug the fixture in and press the MODE button until “dXX” is dis-
played. “XX” represents either “on” or “oFF”.
2. Press the SET UP button until either “Stnd” or “rEv” is displayed.
3. Press the UP or DOWN buttons to reverse the display 180°.
Default Running Mode:
This is a default running mode. When this mode is activated all modes
will return to their default settings.
ADJ Products, LLC - www.adj.com - Ultra Go Par7X User Manual Page 12
Ultra Go Par7X Operating Instructions
Sound Active Mode:
In this mode the Ultra Go Par7X will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until “So-XX” is
displayed. “XX” represents the sound active mode (1-8) currently
displayed. Use the UP and DOWN buttons to scroll through th
sound active modes.
2. After you have found your desired sound active mode, press the
SET UP button to adjust the sound sensitivity. “SJ-X” will be dis-
played. Use the UP and DOWN buttons to adjust the sensitivity.
“SJ-1” is the lowest sensitivity, “SJ-8” is the highest.
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from; Color Fade,
Color Change, and both modes running together. The running speed
is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either
“AFXX”, “AJXX”, or “A-JF” is displayed. Press the SET UP Button
to change between the 3 Auto Run modes
• AFXX = Color Fade mode, there are 8 Color Fade modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Fade modes.
• AJXX = Color Change mode, there are 8 Color Change modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET
UP button until “SP.XX” is displayed. When this is displayed you
can adjust the running speed of your desired program. Use the
UP or DOWN button to adust the speed between “SP.01” (slow-
est) and “SP.16” (fastest). Once you have set your desired running
speed, press the SET UP button to return to your desired Auto
Run Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLXX” is
displayed.
2. There are 35 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
