ADJ SCENE SETTER 48, Руководство пользователя, Страница: 9 / 34

9
O V E R V I E W
Diagram
No.
Feature Description
1 Preset A LEDs
Show the current intensity of the relevant channel num-
bered from 1 to 24.
2 Channel Sliders 1-24
These 24 sliders are used to control and/or program the
intensities of channels 1-24.
3 Flash Buttons 1-24
These 24 buttons are used to bring an individual channel to
full intensity.
4 Preset B LEDs
Show the current intensity of the relevant channel num-
bered from 25-48.
5 Scene LEDs Light when relevant scenes are active.
6 Channel Sliders 25-48
These 24 sliders are used to control and/or program the
intensities of channels 25-48.
7 Flash Buttons 25-48
These 24 buttos are used to bring an individual channel to
full intensity. Also used from programming.
8 Dark Button This button is used to momentarily black out overall output.
9 Down / Beat Rev
DOWN functions to modify a scene in Edit mode;
BEAT REV is used to reverse the chasing direction of a
program with regular beat.
10 Mode Select / Rec Speed
Each tap will activate the oeprating mode in the following
order: CHNS/SCENES, Double Preset, and Single Preset.
Rec Speed: Set the speed of any of the programs chasing
in Mix mode.
11 Up / Chase Rev
Up is used to modify a scene in Edit mode.
Chase Rev is used to reverse the chasing direction of a
scene under Speed Slider control.
12 Page Button Tap to select pages of scenes from Page 1-4.
13 Delete / Rev One
Delete any step of a scene or reverse the chasing direction
of any program.
14 Segment Display Shows the current activity or programming state.
15 Insert / % or 0-255
Insert is to add one step or multiple steps into a scene.
% or 0-255 is used to toggle the display value between %
and 0-255.
16 Edit / All Rev
Edit is used to activate Edit mode.
All Rev is used to reverse the chasing direction of all pro-
grams.
17 Add or Kill / Rec Exit
In Add mode, multiple scenes or Flash buttons will be on at
the same time.
In Kill mode, pressing any Flash button will kill any other
scenes or programs.
Rec Exit is used to exit from Program or Edit mode.
CONTINUED ON NEXT PAGE
FRONT VIEW