American DJ® www.americandj.com - RGB 3C Page 10
American DJ® www.americandj.com - RGB 3C Page 9
16. DMX OUT - Used to send DMX signal to the compatable LED fixtures.
17. DC INPUT - Accepts a DC 9V~12V, 300mA minimum, power supply.
RGB 3C
Controls and Functions - Rear
17
16
RGB 3C
Fader Functions
R/PROGRAM SELECT FADER
PROGRAMS
0-13 RED
14-27 GREEN
28-41 BLUE
42-55 YELLOW
56-69 PURPLE
70-83 CYAN
84-97 WHITE
98-111 RED DREAMING
112-125 GREEN DREAMING
126-139 BLUE DREAMING
140-153 YELLOW DREAMING
154-167 PURPLE DREAMING
168-181 CYAN DREAMING
182-195 WHITE DREAMING
196-209 SEVEN COLOR JUMPING
210-223 SEVEN COLOR DREAMING
224-237 AUTO RUN
238-255 SOUND ACTIVE
G/PROGRAM SPEED FADER
0-255 PROGRAM SPEED SLOW - FAST
B/STROBE/SOUND SENSITIVITY FADER
0-3 OFF
4-255 STROBING SLOW-FAST
0-7 OFF
8-255 SENSITIVITY LOW - HIGH
NOTICE: The B/Strobe/Sound Sensitivity Fader has two func-
tions. When Sound Active mode is running, the fader will con-
trol the sound sensitivity level. When Program mode or Auto
mode is running the fader will activate and control strobing, if
strobing is desired.
RGB 3C
Operation
Sound Active Mode:
1. Press the SOUND ACTIVE button and the corresponding LED
above the button will light.
2. Use the B/FLASH/SENSITIVITY fader to adjust the sound sensitiv-
ity level.
Auto Mode:
1. Press the AUTO button and the corresponding LED above the but-
ton will light.
2. Use the G/SPEED fader to adjust the running speed of the Auto
program.
3. Use the B/FLASH/SENSITIVITY fader to activate strobe and adjust
the rate of the strobe.
Program Select Mode:
1. Press the PROG SELECT button and the corresponding LED
above the button will light.
2. Use the G/SPEED fader to adjust the running speed of the Auto
program.
3. Use the B/FLASH/SENSITIVITY fader to activate strobe and adjust
the rate of the strobe.
Color Mode:
1. Press the COLOR SELECT button and the corresponding LED
above the button will light.
2. Press any of the 9 color buttons or use the RGB faders to make
your own desired color.