ADJ Products, LLC www.adj.com - RGB 3C IR Page 7
1. STATIC COLOR - This button will let you choose a built-in color.
2. AUTO PROGRAM (D4) - Pressing this button will activate the auto pro-
gram, the speed of the program can be adjusted using the G/SPEED
FADER (7).
3. SOUND ACTIVE MODE (D5) - Pressing this button will activate the
sound active mode, the sensitivity of the sound active mode can be
adjusted using the B/FLASH/SENSITIVITY FADER (6).
4. BLACKOUT (D6) - Activates and deactivates blackout mode
5. MIC - This microphone receives external low frequencies to trigger the
unit in Sound-Active mode. This microphone is designed to receive
low frequency sounds only, tapping on the microphone and high pitch
RGB 3C IR Controls and Functions
4 3
2
1
8
9
11
10
7
6
5
ADJ Products, LLC www.adj.com - RGB 3C IR Page 6
RGB 3C IR DMX Set Up
5-Pin XLR DMX Connectors.
Some manufactures use 5-pin DMX-
512 data cables for DATA transmission in place of 3-pin. 5-pin DMX
fixtures may be implemented in a 3-pin DMX line. When inserting stan-
dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,
these adaptors are readily available at most electric stores. The chart
below details a proper cable conversion.
Conductor
5-Pin XLR Male (In)
3-Pin XLR Female (Out)
Pin 1
Pin 5 - Do Not Use
Pin 4 - Do Not Use
Pin 3
Pin 2
Pin 1
Pin 3
Pin 2
Not Used
Not Used
Data True (+ signal)
Data Compliment (- signal)
Ground/Shield
3-Pin XLR to 5-Pin XLR Conversion
