ADJ PIXIE STRIP 120, Руководство пользователя

Страница: 10 / 16

Pixie Strip 30 / 60 / 120 Installation
MULTIPLE FIXTURES
Multiple fixtures may be daisy chained together via the Power/Data In and Power/Data Out ports
located on each fixture. The maximum number of fixtures that may be daisy chained together and
connected to a single driver output port is determined by a combination of the driver output limita-
tions and the RGB pixel control configuration.
Please see the Driver Output Limitation section and the RGB Pixel Control sections of the manual
for the ADJ Pixie Driver 2000 for details on these limitations and how to configure these settings to
best accommodate your desired lighting setup.
The ADJ Pixie Driver 2000 that has been designed to work with these lighting fixtures has been pro-
grammed not to allow Pixie Strip fixtures to be added in such a way that the driver port output limita-
tions will be exceeded. This is done by limiting the number of Pixie Strip units that can be selected in
the System Menu of the driver based on what has already been set up. Please see the Driver Output
Limitations section of the Pixie Driver 2000 manual for more detailed information.
ADJ Products, LLC - www.adj.com - Pixie Strip 30 / 60 / 120 User Manual Page 10
ALLOWABLE CABLE LENGTHS
12-AWG 4-pin extension cable or 16-AWG 4-pin extension cable may be used to link multiple de-
vices. However, please take note of maximum allowable cable lengths, as listed below:
- Max length of cable connecting a controller and a device: 59 feet (18m)
- Max length of cable connecting two devices: 32 feet (10m)
- Max total cable length in a single chain: 213 feet (65m) for 12-AWG / 98 feet (30m) for 16-AWG