background image

4

Unpacking: Thank you for purchasing the PinPoint Gobo COLOR by ADJ Products, LLC. Every unit 

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the 

shipping carton for damage that may have occurred during shipping. If the carton appears to have been 

damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to oper-

ate the unit have arrived intact. In the event that damage has been found or parts are missing, please 

contact our toll free customer support number for further instructions. Do not return this unit to your 

dealer without first contacting customer support. 

Introduction:  The ADJ PinPoint Gobo Color is a battery powered GOBO projector powered by a 

10-Watt Quad (RGBA 4-in-1) LED.  It includes 4 standard removable GOBOs and a frost filter to diffuse 

the beam for wider washes of light. When the GOBO is removed, the unit may be used as a pinspot to 

spot tables, decor, architecture, or used for special effects. The unit has an easy replaceable GOBO 

holder so that user may interchange the supplied GOBOs or insert custom GOBOs. Slider are located 

on the side of the fixture and can be used to manually adjust the focus and beam angle.

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit 

forums.adj.com

 with questions, comments or suggestions.

Parts: To purchase parts online visit: 

http://parts.adj.com  

(US)

http://www.adjparts.eu  

(EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET 

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]

ADJ PRODUCTS LLC USA 

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 | 

www.adj.com

 | 

[email protected]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99 

www.americandj.eu

 | 

[email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

WARNING! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or 

moisture. 
CAUTION! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, 

as doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service, 

please contact ADJ Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle when ever possible.

I N T R O D U C T I O N

Содержание PinPoint Gobo COLOR

















Отзывы: