ADJ PAR Z120 RGBW, Руководство пользователя

Страница: 19 / 25

19
R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: For RDM to work properly, RDM enabled equipment must be used throughout the entire system,
including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for lighting,
allowing the DMX systems of the device to be managed, modified, and monitored remotely (hence, remote device
management). This protocol is ideal for fixtures installed in locations that are not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled controller to send
out a signal to devices on the wire, as well as allowing the fixture to respond (known as a GET command). The
controller can then use it’s SET command to modify settings that would typically have to be changed or viewed
directly via the unit’s display screen, including the DMX Address, DMX Channel Mode, and Temperature
Sensors.
FIXTURE RDM INFORMATION:
RDM Code Device ID Device Model ID Personality ID
0X667 OPEN 1639 OPEN
Please be aware that not all RDM devices support all RDM features, and therefore it is important to
check beforehand to ensure that the equipment that you are considering includes all the features
that you require.
The following parameters are accessible in RDM on this device:
PARAMETER ID DISCOVERY
COMMAND
SET
COMMAND
GET
COMMAND
DISC_UNIQUE_BRANC H
V V V
DISC_MUTE
V V V
DISC_UN_MUTE
V V V
DEVICE_INFO
V
SOFTWARE_VERSION_ LABEL
V
DMX_START_ADDRESS
V V
IDENTIFY_DEVICE
V V
DEVICE_MODEL_DESC RIPTION
V
COMMS_STATUS
V V
QUEUED_MESSAGE
V V
STATUS_MESSAGES
V V
STATUS_ID_DESCRIPTI ON
V V
CLEAR_STATUS_ID
V V
PRODUCT_DETAIL_ID_L IST
V
MANUFACTURER_LABE L
V V
DEVICE_LABEL
V V V
BOOT_SOFTWARE_VER SION_ID
V
DMX_PERSONALITY
V V
DMX_PERSONALITY_D ESCRIPTION
V V
SLOT_INFO
V
SLOT_DESCRIPTION
V
DEFAULT_SLOT_VALUE
V
SENSOR_DEFINITION
V V
SENSOR_VALUE
V V
DEVICE_HOURS
V
RESET_DEVICE V
DMX_STATE
V