©
American DJ
®
- www.Americandj.com - Micro Wash WWCW User Manual Page 8
Micro Wash WWCW Operating Instructions
Micro Wash WWCW Operating Instructions
©
American DJ
®
- www.Americandj.com - Micro Wash WWCW User Manual Page 7
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE
button until 0001 is displayed, press the UP button to display 0002.
Now the display will disappear after 10s. Press any button to turn
the display on again. Be advised though that the display will turn off
automatically after 10 seconds.
To set the display press the MODE button until 0001 is displayed. The
display will now stay on at all times.
0001= LCD display on at all times.
0002= LCD display shuts off after 10 seconds.
Operating Modes:
You can use the Micro Wash WWCW in five ways:
• Sound-Active mode - The unit will react to sound, chasing through the
built in programs.
• Macro Mode - There are 19 color temperatures to choose from.
• Auto Mode - There are 8 built in programs to choose from. The Auto
mode running speed is adjustable.
• CWWW mode - Control the intensity of the Cool White and Warm
White colors. Adjust the intensity to create your own desired color
temperature.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the American DJ® Show Designer™.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units built-in programs.
Any unit can act as a Master or as a Slave however, only one unit can be
programmed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR microphone cables to link your units together.
Remember that the Male XLR connector is the input and the Female
XLR connector is the ouput. The first unit in the chain (master) will
use the female XLR connector only. The last unit in the chain will use
the male XLR connector only.
2. Set the “Master” unit to your desired mode or operation.
3. For the “Slave” unit(s), set the display to 2 Channel DMX mode or 5
Channel DMX mode. The display should read either “1000” or
“2000” or any of their variables, i.e “1001, “1002”, “2001”, “2002 etc..
4. Connect the “Slave” unit or units and they will automatically start to
follow the “Master.”
Sound Active Mode:
In this mode the Micro Wash WWCW will react to sound, and chase
through the different color temperatures.
1. Plug the fixture in and press the MODE button until “3-So” is dis-
played.
2. The fixture will now change via sound.
Color Temperature Mode:
1. Plug the fixture in and press the MODE button until “4-XX” is dis-
played.
2. There are 19 preset color temperatures to choose from. Select your
desired color temperature by pressing the UP and DOWN buttons.
The color temperature chart on the next page will let you know which
number corresponds to which preset temperature.
Auto Mode:
1. Plug the fixture in and press the MODE button until “5-XX” is dis-
played.
2. There are 8 built in programs to choose from. Select your desired
program by pressing the UP and DOWN buttons. You can set your
program speed by following the instructions below.
Auto Mode Speed Adjustment:
1. To adjust the speed of your Auto mode program press the MODE
button until “6-XX” is displayed.
2. Press the UP or DOWN buttons to make the adjustments. “6-01” is
the fastest speed, “6-15” the slowest speed. When the display read
“6-00” the Auto mode is running by sound activity. Set to your desire.
CW & WW Mode:
1. Plug the fixture in and press the MODE button until:
2. When XXX is displayed you are in CW (Cool White) dimming
mode. Press the UP and DOWN buttons to adjust intensity.
3. When XXX is displayed you are in WW (Warm White) dimming
mode. Press the UP and DOWN buttons to adjust intensity.
