ADJ Products, LLC - www.adj.com - Mega GO Par64 PLUS User Manual Page 18
ADJ Products, LLC - www.adj.com - Mega GO Par64 PLUS User Manual Page 19
Mega GO Par64 PLUS ADJ LED RC2 Control
• If the Green LED’s flash you are in DMX Mode 3: 6 DMX
Channels.
• If the Blue LED’s flash you are in DMX Mode 4: 9 DMX
Channels.
• If the UV LED flashes you are in DMX Mode 5: 10 DMX
Channels.
Mega GO Par64 PLUS UC IR & Airstream App Control
The UC IR (sold separately) infrared remote gives you control of
various functions (See below). To control the fixture you must aim the
remote at the front of the fixture and be no more than 30 feet away.
To use the ADJ UC IR you must first activate the fixtures infrared sen-
sor, to activate the sensor please see the instructions on page 14.
The Airstream IR (sold separately) remote transmitter plugs into the
headphone jack of your iOS phone or tablet. To control your IR fixture
you must raise the volume to the maximum on your iOS phone or tab-
let and aim the transmitter at the fixture sensor and be no more than
15 feet away. After you have purchased the Airstream IR transmitters,
the app is a free download from the app store for your iOS phone
or tablet. The app comes with 3 pages of control depending on the
fixture you are using. Please see below for IR functions including the
corresponding app page.
Works with App page 1.
STAND BY
-
Pressing this button will blackout the fixture. Press the
button again to return to the initial state.
FULL ON
-
Hold this button down to fully light up the unit. When you
let the button go, the unit will return to its previous state.
FADE/GOBO
-
This button activates color fade mode.
“” and “DIMMER -” -
These buttons are used to adjust
the color output intensity in static color mode.
STROBE
-
Press and hold this button for strobing.
COLOR
-
Press this button to activate color mode. Use buttons 1-9
to find your desired color.
1-9
-
Use buttons 1-9 to select your desired color when color mode is
active, and your desired show when show mode is active.
SOUND ON & OFF -
Use the buttons to activate and deactivate
sound active mode.
SHOW 0 -
Press this button to activate show mode. Use buttons 1-9
to find your desired show. Press the Show 0 button twice to run show
10, and button 1 twice to run show 11.