ADJ Mega Bar 50RGB RC, Руководство пользователя

Страница: 13 / 24

ADJ Products, LLC - www.adj.com - Mega Bar 50RGB RC User Manual Page 13
DMX Control:
Operating through a DMX controller gives the user the freedom to create custom programs tailored
to his or her own individual needs. Follow the directions below to set your DMX Mode and address.
1. Before connecting to a DMX controller, please select your desired mode by pressing the DMX
Mode button, then using the “+” or “-” buttons to scroll through the DMX Channel Modes.
2. After you have selected your mode, set the DMX address for the fixture by pressing the “S” but-
ton. When the “S” button is pressed, the LED’s will flash 2-3 times and all the red LED’s will light.
Use the number buttons to key in your desired address.
Note: When setting the DMX address, an LED color will glow each time a button is pressed,
and when you have set the DMX address correctly all LED’s will flash 2-3 times. The signifi-
cance of the LED illumination is explained below:
• If all of the Red LED’s glow you are in DMX Mode 1: 1 DMX Channels
• If all of the Green LED’s glow you are in DMX Mode 2: 2 DMX Channels
• If all of the Blue LED’s glow you are in DMX Mode 3: 3 DMX Channels
• If Red LED’s & Green LED’s glow you are in DMX Mode 4: 4 DMX Channels
• If Red LED’s & Blue LED’s glow you are in DMX Mode 5: 5 DMX Channels
• If Green LED’s & Blue LED’s glow you are in DMX Mode 6: 6 DMX Channels
• If all of the LED’s glow you are in DMX Mode 7: 7 DMX Channels
3. Now you may connect the fixture via the XLR connections to any standard DMX controller. See
the DMX Values & Traits sections of this manual for detailed information.
Mega Bar 50RGB RC ADJ LED RC Operation