ADJ LTS COLOR, Руководство пользователя, Страница: 9 / 18

9
M A I N T E N A N C E G U I D E L I N E S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to insure proper function and an extended life. The frequency of
cleaning depends on the environment in which the device operates in: damp, smoky or particularly
dirty environments can cause greater accumulation of dirt on the stand or inner tube. Clean the
external surface at least every 20 days with a soft cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life.
There are no user serviceable parts inside these devices, please refer all other service issues to an
authorized ADJ service technician. Should you need any spare parts, please order genuine parts
from your local ADJ dealer or online at parts.adj.com .
Please refer to the following points during routine inspections:
A detailed review by an approved electrical engineer every three months, to make sure the circuit
contacts are in good condition and prevent overheating.
Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out during
normal operation resulting in damage or injury as larger parts could fall.
Check for any deformations on the stand, stays, legs, knobs, inner pipe and T-bar. Deformations
could allow for dust to enter into the devices. Damaged rigging points or unsecured rigging could
cause the devices to fall and seriously injure a person(s).
Electric power supply cables must not show any damage, material fatigue or sediments.