ADJ Products, LLC - www.adj.com - JELLY GO PAR64 RGBA User Manual Page 15
ADJ Products, LLC - www.adj.com - JELLY GO PAR64 RGBA User Manual Page 16
JELLY GO PAR64 RGBA ADJ LED RC Operation
The ADJ RFC remote
(sold seperately) has many different functions and
allows you to control your JELLY GO PAR64 RGBA from long distance.
The ADJ RFC remote can control your system up to 150 ft. To use the
remote you must first activate the fixtures receiver, to activate the receiv-
er please see the instructions on page 13.
BLACKOUT
-
Pressing this button will blackout the fixture. Press and
hold this button for 3 seconds to return to default settings and default
running mode.
AUTO RUN
-
This button will run 1 of 16 automatic programs. You can
scroll through the 16 programs using the “+” and “-” buttons. You can
control the speed of the programs by pressing the SPEED button and
then pressing the “+” and “-” buttons. You can control the fade speed of
the Auto Run by pressing the FLASH button and then pressing the “+”
and “-” buttons.
PROGRAM SELECTION
-
This button will activate the static color
mode. Use the “+” or “-” to scroll through the 47 colors. Once you have
found your color, you can press the Flash Button to activate strobing and
use the “+” or “-” to adjust the Flash rate.
FLASH
-
This button will activate the flash (strobe) effect or adjust the
sound sensitivity while in sound active mode. You can adjust the flash
speed or sound sensitivity level by pressing the “+” and “-” buttons.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the
speed of the Auto run.
SOUND ACTIVE -
This button activates sound active mode. Use the “+”
or “-” to scroll through the 15 sound active programs. Press the FLASH
button and use the “+” & “-” buttons to adjust the sound sensitivity.
R G B A -
Press either one of these buttons and the press the “+” or “-”
to adjust the brightness. Press the Flash Button to activate strobing and
use the “+” or “-” to adjust the Flash rate.
“+” and “-” -
Use these buttons to adjust the flash rate, speed of the
Auto Run mode, sound sensitivity, and the intensity output of the RGB
colors. These buttons are also used to scroll through the different static
colors, auto run programs, and sound active programs.
JELLY GO PAR64 RGBA 2 Channel Mode
Channel Value
Function
1 0 - 255 COLOR MACROS
(
Please see the color macro chart page 20)
2 0 - 255 DIMMER 0% - 100%
JELLY GO PAR64 RGBA 4 Channel Mode
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
5 MASTER DIMMER
0 - 255 0% - 100%
JELLY GO PAR64 RGBA 5 Channel Mode
JELLY GO PAR64 RGBA 1 Channel Mode
Channel Value
Function
1 0 - 255 COLOR MACROS
(
Please see the color macro chart page 20)
