ADJ Products, LLC - www.adj.com - Inno Pocket Spot Twins Instruction Manual Page 18
ADJ Products, LLC - www.adj.com - Inno Pocket Spot Twins Instruction Manual Page 19
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Inno Pocket Spot Twins has 2 DMX channel modes; 19 chan-
nel mode or 23 channel mode. See pages 22-29 for detailed
description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 11 to select your desired DMX
Channel mode and set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until “
SOUN
” is displayed, and press
ENTER. Press the UP or DOWN buttons so that “
ON
” is dis-
played and press ENTER.
2. Press the MENU button until “
SENS
” is displayed, and press
ENTER. Use the UP and DOWN buttons to adjust the sound
sensitivity. Press ENTER when you have found your desired sensi-
tivity level.
Show Mode:
This mode allows either a single unit or several units
linked together, to run one of four shows that you choose.
1. Press the MENU button until “
SHND
” is displayed, and press
ENTER.
2. Use the UP or DOWN buttons to you find your desired show,
and press ENTER.
Inno Pocket Spot Twins Operation
Inno Pocket Spot Twins
Home Adjustment Menu
GOB1
- Adjustment of the gobo wheel position for head
1.
1. Press the ENTER button for at least 5 seconds to enter the sub-
menu. Press the UP or DOWN buttons so that “
GOB1
” is displayed
and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
GOB2
- Adjustment of the gobo wheel position for head
2.
1. Press the ENTER button for at least 5 seconds to enter the sub-
menu. Press the UP or DOWN buttons so that “
GOB1
” is displayed
and press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
