ADJ Products, LLC - www.adj.com - Inno Pocket Beam Q4 Instruction Manual Page 3
ADJ Products, LLC - www.adj.com - Inno Pocket Beam Q4 Instruction Manual Page 2
• DMX-512 Protocol Compatible
• 3 DMX Modes: 10 Channels, 11 Channels, & 13 Channels
• 3 Operating Modes - Sound Active, Show Mode, & DMX Control
• Internal Microphone
• Digital Display for Address and Function Setting
• 4 Preprogrammed Shows
• UC-IR Compatiable (Not Included)
Inno Pocket Beam Q4 Features
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modification to this unit.
Inno Pocket Beam Q4 Handling Precautions
Inno Pocket Beam Q4
Warranty Registration
The Inno Pocket Beam Q4 carries a 2 year (730 days) limited war-
ranty. Please fill out the enclosed warranty card to validate your
purchase and warranty. You may also register your product online
at www. adjproducts.com. All returned service items whether under
warranty or not, must be freight pre-paid and accompany a return
authorization (R.A.) number. If the unit is under warranty you must
provide a copy of your proof of purchase invoice. Please contact ADJ
Products, LLC customer support for a R.A. number.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Inno Pocket Beam Q4
General Instructions
Inno Pocket Beam Q4
General Information
Unpacking:
Thank you for purchasing the Inno Pocket Beam Q4 by
ADJ Products, LLC. Every Inno Pocket Beam Q4 has been thoroughly
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support first.
Introduction:
The Inno Pocket Beam Q4 is a DMX intelligent, moving
head, mini LED fixture. The Inno Pocket Beam Q4 can operate as a
stand alone fixture or in a Master/Slave configuration. The Inno Pocket
Beam Q4 has three operating modes; a sound active, show mode,
DMX controlled. This fixture is suitable for theaters, studios, retail
stores, and other similar locations. For best results use fog or special
effects smoke to enhance the beams projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
