ADJ HYDRO WASH X19, Руководство пользователя

Страница: 14 / 47

14
Screw one clamp via an M12 screw and nut into the Omega Bracket. Insert the quick-lock fasteners
of the Omega Bracket into the respective holes of the fixture base plate.
NOTE: The clamp must be
attached to the Omega Bracket before attaching the bracket to the fixture . Tighten the quick-
lock fasteners fully clockwise. Pull the safety-cable through the openings located on the bottom of the
unit and over the trussing system or a safe fixation spot. Insert the end in the carabiner and tighten
the safety screw.
NEVER stand directly below the fixture when rigging, removing, or servicing.
Always allow approximately 60 minutes for the fixture to cool down before servicing.
F I X T U R E I N S TA L L AT I O N