©
American DJ
®
- www.americandj.com - Galaxian Move Instruction Manual Page 14
©
American DJ
®
- www.americandj.com - Galaxian Move Instruction Manual Page 13
program will test pan/tilt movement and colors.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time
of the fixture.
1. Tap the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until “
VER
” is displayed, press ENTER.
2. The display will now display the version of software. Press
MENU to exit.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “
RSET
” is displayed, press ENTER.
2. The fixture will now reset
Galaxian Move™
System Menu
Operating Modes:
The Galaxian Move™ can operate in three
different modes. In each mode you can run the fixture as a
stand alone fixute or in a master/slave confiugration. This next
section will detail the differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of four shows that you choose.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
®
Show
Designer.
™
Master-Slave Operation
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressing the ENTER button.
3. On the slave units
tap the MENU button until “
SLND
” is dis-
played, and Press ENTER. Choose either
“
SL 1
” or “
SL 2
” and
press ENTER. Please see page 11 for more info.
4. The slave units will now follow the Master unit.
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the pan, tilt, red and green
lasers individually, rotation, macros, and head movement speed. A
DMX controller allows you to create unique programs tailored to your
individual needs.
Galaxian Move™
Operation