Fusion FX Bar 2 System Menu
Fusion FX Bar 2 System Menu
ADDR
-
DMX Address Setting
via control board -
1. Tap the MENU button until “
ADDR
” is displayed, press ENTER.
2. “
X
” will now be displayed, “X” represents the displayed address.
Press the UP or DOWN buttons to find your desired address.
3. Press ENTER to confirm, and then press and hold the MENU
button
for at least three seconds
to assign.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press ENTER.
Either “
MAST
” or “
SLAE
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
SHND
- Show modes 0 - 2 (Factory programs).
1. Tap the MENU button until “
SHND
” is displayed, press ENTER.
2. “
S
h
X
” will now be displayed, “X” representing a number
between 0-2. Programs 1 & 2 are preset show, while “
S
h
0
” is
On-Board System Menu.
The Fusion FX Bar 2 comes with an easy
to navigate system menu. This next section will detail the functions of
each command in the system menu.
Please read the next section
thoroughly!
To access the main menu press the MENU button. Tap the UP or DOWN
buttons until you reach function you wish to change. When you reach
the function you wish to change press the ENTER button
.
When a func-
tion is selected use the
UP or DOWN buttons to change the function
settings. Once your changes are made press the ENTER button to con-
firm. If the unit remains static for more then eight seconds the fixture
will automatically return to its last setting. To exit without making any
changes press the MENU button.
©
American DJ Supply
®
- www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 7
©
American DJ Supply
®
- www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 8
