ADJ Products, LLC - www.adj.com - Fog Fury Jett Pro Instruction Manual Page 9
dX -
DMX Channel Mode and DMX Address Setting
.
1. Press the either the MENU button until “dX” is displayed. “X” rep-
resents the current DMX channel mode that is displayed. There are 5
DMX channel modes. See pages 12-13 for the DMX channel modes
and traits.
2. When you find your desired DMX channel mode press the ENTER
button. “A.XXX” will be displayed. “XXX” represents the current
displayed DMX address. Use the UP or DOWN buttons to find your
desired DMX address.
CH.X -
This is the wireless remote channel setting.
1. Press the MENU button until “CH.X” is displayed. “X” represents
the current remote channel that is displayed (A-d). “A-D” correspond
to the buttons on the wireless remote. Example: If the fixture is set to
“CH.B” the corresponding button on the remote will emit fog when
the button is pressed. Note: You can set more than one machine to
the same wireless remote setting.
2. Press the ENTER button to access the color macro submenu. Use
the UP or DOWN buttons to scroll through and select 1 of 64 color
macros or random macros. When you press the corresponding button
on the wireless remote to the setting (A-d) you have selected on the
unit, the color you have selected will be the color that is output along
with the fog that is emitted. Note: When in any color submenu,
after 4 seconds of no operation, fixture will revert back to “CH.A”.
Fog Fury Jett Pro
System Menu
ADJ Products, LLC - www.adj.com - Fog Fury Jett Pro Instruction Manual Page 14
Channel Value
Function
1 FOG
0 - 31 OFF
32 - 255 MAX FOG
2 RED
0 - 255 0% - 100%
3 GREEN 1 (OUTER LEDS)
0 - 255 0% - 100%
4 BLUE
0 - 255 0% - 100%
5 AMBER
0 - 255 0% - 100%
6 GREEN 2 (INNER LEDS)
0 - 255 0% - 100%
7 UV
0 - 255 0% - 100%
Fog Fury Jett Pro
7 Channel Mode
