manualshive.com logo in svg

ADJ FOCUS SPOT 2X, Инструкция пользователя, Страница: 21 / 30

Поделиться
Скачать
ADJ FOCUS SPOT 2X Скачать руководство пользователя страница 21

ADJ Products, LLC  -  www.adj.com  - Focus Spot 2X User Manual Page 20

  

Focus Spot 2X

                                                                           

Master-Slave Set Up

Master-Slave Configuration: 

This function will allow you to link up to 16 units together and operate without a controller. The units 

will be sound activated. In Master-Slave operation one unit will act as the controlling unit and the 

others will react to the controlling units programs. Any unit can act as a Master or as a Slave.

1.  Using approved DMX data cables, daisy chain your units together via the XLR connector on the    

  rear of the units. Remember the Male XLR connector is the input and the Female XLR connector 

  is the output. The first unit in the chain (master) will use the female XLR connector only - The last   

  unit in the chain will use the male XLR connector only. For longer cable runs we suggest a terminator    

  at the last fixture.
2.  On the Master unit press the MENU button until “

Slave Mode

” is displayed, and press ENTER.    

  Use the UP and DOWN buttons to scroll to the “

Master

” setting and press ENTER.  

3.  After setting the Master unit to the master setting find and set your desired operating mode.
4.  On the slave units press the MENU button until “

Slave Mode

” is displayed, and press ENTER.    

  Choose either “

Slave 1

” or “

Slave 2

” and press ENTER. 

5.  The slave units will now follow the Master unit.

The focus can be adjusted under DMX control. The output can be manually zoomed in/out using the 

“zoom” wheel located on the bottom front of the moving head. Rotate the zoom wheel back and forth 

until you get your desired output. This wheel is used in conjunction with the focus channel in DMX 

mode as well. 

  

Focus Spot 2X

                                                                                        

Manual Zoom

Содержание FOCUS SPOT 2X































Отзывы:

Нет отзывов