ADJ FLAT PAR QA12XS Скачать руководство пользователя страница 3

  Flat Par QA12XS   

                                 Introduction

ADJ Products, LLC  -  www.adj.com  - Flat Par QA12XS User Manual Page 2

Unpacking: 

Thank you for purchasing the Flat Par QA12XS by ADJ 

Products, LLC

®

. Every Flat Par QA12XS has been thoroughly tested 

and has been shipped in perfect operating condition. Carefully check 

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your fix-

ture for any damage and be sure all accessories necessary to operate 

the unit has arrived intact. In the case damage has been found or parts 

are missing, please contact our toll free customer support number for 

further instructions. Do not return this unit to your dealer without first 

contacting customer support. 

Introduction: 

The ADJ

 

Flat Par QA12XS is part of a continuing pur-

suit to create high quality intelligent lighting. The Flat Par QA12XS is a 

DMX intelligent, high powered LED par fixture. This fixture can be used 

in a stand alone mode or connected in a Master/Slave configuration. 

This wash has five operating modes: Sound Active mode, Auto mode, 

RGBA mode, Static Color mode and DMX control mode.

 

Customer Support:

 ADJ Products, LLC provides a customer sup-

port line, to provide set up help and to answer any question should you 

encounter problems during your set up or initial operation. You may 

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. 

Pacific Standard Time.

 

Voice:   

(323) 582-3322

 

Fax:    

(323) 582-3108

 

E-mail:  

[email protected]

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

  Flat Par QA12XS                                                        Notes 

ADJ Products, LLC  -  www.adj.com  - Flat Par QA12XS User Manual Page 25

Содержание FLAT PAR QA12XS















Отзывы: